咨詢問題我要詳細了解該課題 -
2,6-二氯甲苯的合成
我公司現在用2-氨基-6-氯甲苯重氮化合成的,成本偏高,我們想用甲苯或鄰氯甲苯直接合成,有沒有可能把成本降到3萬以內,現在有沒有可行的成熟技術.
咨詢者：劉興度 咨詢時間：2008-03-25 狀態：已回復
專家 中國化工網客服 解答表達感謝 繼續咨詢該問題 參與討論-
for preparing 2,6-dichlorotoluene. Chlorine gas was bubbled into a molten mixture of 4-toluenesulfonyl chloride (20 g., 105 mM) and antimony trichloride (100 mg, 4 mM) at such a rate as to maintain a reaction temperature of 80.degree. C. When the theoretical amount of chlorine has been taken up, 75% aqueous sulfuric acid (50 mL) was added to the reaction mixture. The resulting dark solution was heated at 130.degree. C. for 40 hours and poured into water (100 mL). This aqueous mixture was neutralized by the slow addition of ammonium hydroxide, followed by ether extraction. The ether extracts were washed with water and brine, dried over anhydrous sodium sulfate and distilled at reduced pressure to give 2,6-dichlorotoluene (8.4 g, 50 wt. %).
yfzhang8888@163.com
張元發
回復：中國化工網客服 回復時間：2008-03-26
留言 08-03-26 09:08 回復者:熱心網友咨詢 表達感謝-
A mixture of 2,6-dichloro-4-toluenesulfonyl chloride (4 g, 15.5 mM) and 75% aqueous sulfuric acid (10 mL) was heated at 130.degree. C. for 40 hours. The reaction mixture was cooled and extracted with toluene. The toluene extracts were washed first with 5% aqueous sodium hydroxide, followed by water and finally brine. Distillation of the toluene left a residue which did not contain 2,6-dichlorotoluene.
共有1條記錄 1
注意：以上網友留言只代表網友個人觀點，不代表本網觀點。
- 回復
-
用戶發布回復請嚴格遵守以下發布細則：
1）不得發布虛假、造謠、誹謗、漫罵、辱罵、中傷或包含人身攻擊的的信息；
2）不得惡意灌水，不得重發、濫發信息；
3）不得發布與主題無關或相關度不高的信息；
4）根據國家有關政策法規規定，不得發布、傳播與麻醉原料藥、精神原料藥、醫療用毒性原料藥、放射性原
料藥、戒毒原料藥，以及相應的成品藥有關的任何信息；
5）根據國家有關條例通知規定，不得發布與時政、社會、娛樂、體育、文化等新聞有關的信息；
否則將刪除回復，甚至屏蔽帖子回復人的ID，構成違法、犯罪的，將依法移交給公安機關處理。
化工網全權保留被發布于本網站所有信息的編輯權、發布權、解釋權等權利。
謝謝合作！
- 推薦專家專家登錄
-
